Home > News


How to Maintain Pvc Floor?

Apr. 01, 2020

 In order to better use the PVC floor, we must learn to maintain the floor. The floor maintenance can make the floor still as new and extend the life of the floor. SPC Flooring supplier will introduce how to maintain the floor. 

Purpose of cleaning and maintenance

1. Improve appearance: timely remove the dirt produced in daily use so that the elastic floor can fully display its extraordinary appearance and natural gloss.

2. Protect the floor: Protect PVC resilient flooring from accidental chemicals, cigarette butts, shoe marks, oil, and water, etc., minimize the mechanical wear of the surface, and make the floor itself durable. Fully sent

Swing, thereby extending the life of the floor.

3. Convenient care: Due to the compact surface structure and special treatment of PVC sponge flooring, pay attention to daily cleaning and maintenance, which can make the floor easier to care for and extend the service life.

Pvc Resilient Flooring

Pvc Resilient Flooring

Nursing considerations

1. All kinds of dirt on the ground should be removed in time.

2. It is strictly forbidden to soak the floor in open water. Although some floors use water-proof glue to separate water sources (such as floor drains, water rooms, etc.), long-term soaking in water will seriously affect the life of the floor.

Use a water suction machine to dry the sewage in time during the cleaning process.

3. For places with a lot of people and large wear, the maintenance period should be shortened, and the number of waxing passes for high-strength facial wax should be increased.

4. It is absolutely forbidden to use hard and rough cleaning utensils (such as steel balls, 100 cleaning cloths, etc.) to prevent sharp objects from colliding with the elastic floor.

5. It is strongly recommended to place cymbal pads at the entrance of public places with high traffic to prevent dirt, sand, and other dirt from scratching the floor.

Cleaning after flooring / before use

1. First, remove the dust and debris on the floor surface.

2. Use a scrubber and 3M red abrasive pads or similar products to clean it at a low speed (diluted with a powerful general cleaner 1: 20 in water and add it to the scrubber) to remove the protective wax, grease, dust and other dirt on the floor surface.

Scale, use a water suction machine to dry the sewage.

3. Wash with water and blot dry.

4. If necessary, apply 1-2 layers of high-strength facial wax.

Detergent: powerful general cleaner high strength facial wax

Tools: Red Grinding Machine

Daily cleaning and maintenance

1. Push dust or vacuum cleaner. (Dust the mop with dust on the mop, and push the dust after drying.)

2. Wet mopping. (Use floor cleaning polish to dilute 1:20 with water, mop the floor with a semi-moist mop.) If necessary, you can also use a scrubber to cooperate with low-speed cleaning.

Tool: Dust Push Mop

Regular cleaning and maintenance

1. Push dust or vacuum cleaner.

2. Floor cleaning. The glazing agent is diluted with 1:20 water, and mopping or rubbing with a high-speed polishing machine and a red polishing pad.

3. 1-2 layers of high-strength facial wax.

4. If necessary, can be combined with a high-speed polishing machine plus white polishing pad polishing.

Detergent: floor cleaning polish high strength face wax

Completely refurbished

1. Push dust or vacuum cleaner.

2. Dilute with strong dewaxing water 1: 10 and evenly spread on the ground. Wait for 5 to 10 minutes. Use a scrubber and red abrasive pad to clean and remove wax at low speed. Use a water suction machine to dry the sewage in time.

3. Rinse with water and blot until the floor does not leave any residual detergent.

4. If necessary, apply 1-2 layers of high-strength facial wax.

Cleaner floor cleaning _ polish high strength face wax

Equipment: Red and white grinding wheel dust suction machine

Treatment of special dirt

1. Oil stains: For local oil stains, pour the water-based degreaser stock directly on the towel and wipe it; for large areas of oil stains, dilute the Victaulic water-based degreaser by 1:10, and use the scrubber to add a red abrasive sheet to clean at a low speed.

2. Black offset printing: spray cleaning wax with the high-speed polishing machine and white polishing pad polishing. For relatively long offset printing, you can pour the powerful offset removing agent directly on the handle to wipe it.

3. Glue or chewing gum: Pour it on the towel with a professional strong degreaser and wipe it off.

Detergent: water-based degreaser spray cleaning and maintenance wax strong black offset remover strong degreaser.

PreviousNine Reasons To Recommend Spc Flooring Instead Of Floor Tiles (part 1)

NextPvc Floor Construction Process and Method (Below)