Home > News

News

How to identify the quality of SPC lock floor?

Sep. 06, 2019

SPC Flooring supplier - XR Flooring will show you how to identify the quality of SPC lock floor at a glance!

First, to see

The integral design and color that sees lock buckle floor is consistent, the decorative pattern of floor surface is clear, exquisite. The lock that still needs to notice a floor all the more is buckled flat, shun slippery, this is affecting the effect that Wood Effect SPC Flooring later period shop installs directly.

SPC Flooring supplier

SPC Flooring supplier

Second, smell

PVC plastic flooring using PVC materials, and selected non - radioactive marble powder. Polyethylene plastic is environmentally friendly and non-toxic renewable resources, in the production process, all added ingredients are completely non-toxic and non-radioactive, does not contain any heavy metal. So there's nothing pungent about smelling close to the surface. The smaller the taste, the better the quality. Need to pay attention to is, after the lock floor leaves the factory, the longer the time placed, the smaller the smell will be.

SPC Flooring supplier

SPC Flooring supplier

Third, water

Dripping test is divided into two aspects: the first is to test the SPC Flooring for sale of the lock is connected to the place, whether water leakage; The 2nd also can test the antiskid performance of the floor.

Take out two lock floor arbitrarily above all, connect through lock naturally, put on the ground flatly. Drop on water in juncture place next, after standing 3-5 hours, wipe water with dry dishcloth clean, separate two floors, check whether there is water mark inside card groove.

The SPC lock floor USES PVC material, does not absorb water, encounter water instead astringent, so prevent slippery moistureproof.

When testing skid resistance, it can also be done by dripping. Drop a few water on the floor first, rub with the hand one rub, without slippery feeling, more astringent better.

SPC Flooring supplier

SPC Flooring supplier

Fourth, the lamp shines

Through lamplight illuminate can judge basically lock when floor is in production, what use is brand-new makings or recycle makings. The test is also relatively simple: you can turn on the phone's flashlight, press it against the lock floor, and look from the other side to see if you can see the bright spot. Usually, new material can be seen.

SPC Flooring supplier

SPC Flooring supplier


Previous​XIREN TECHNOLOGY---- Think what you want, Do what you need!

NextThe difference between three new types of floor